[Value pack] complete arrow | SPHERE Pioneer 6.2 - Carbon - 12 arrows

[Value pack] complete arrow | SPHERE Pioneer 6.2 - Carbon - 12 arrows

The Pioneer extends the SPHERE range with a high-quality shaft that offers exceptional value for money. With wound, extremely stable carbon in 24T quality, a straightness of ± 0.006 inches and an inner diameter of 6.2mm, it is particularly suitable for 3D shooting. The shaft is precise, light and guarantees flat, clean trajectories even at long distances.

The wide selection of spines makes it an all-rounder for all types of recurve bows, but it is also ideal for Compound bows. The Pioneer is therefore a very good choice for all archers who prefer thin arrows and, with a neutral white label, can be combined with all fletching colours and types.

The standard inner diameter of 6.2mm / 0.246 inch allows the use of all components from SPHERE or other manufacturers that are designed for this size.

Technical data:

Spine 350

• Ø inside: 6.20mm / 0.246 inch
• Ø outside: 7.42mm
• Shaft weight (in grain per inch): 7.88
• Straightness (in inches): ± 0.006
• Material: Carbon
• Suitable protector ring / nock collar: 7.45 mm
• Length: finished arrow: 32 inches
• Tip: screw tip with O-ring, 100 g
• Fletching: 3-inch vanes or natural feathers, colour: red/red/yellow
• Nock: slip-in nock

Spine 400

• Ø inside: 6.20mm / 0.246 inch
• Ø outside: 7.28mm
• Shaft weight (in grains per inch): 6.97
• Straightness (in inches): ± 0.006
• Material: Carbon
• Suitable protector ring / nock collar: 7.30mm
• Length: 32 inches
• Tip: Screw-in point with O-ring, 100gr
• Fletching: 3 inch vanes or natural feathers, colour: green/green/orange
• Nock: Slip-in nock

Spine 500

• Ø inside: 0.246 inch / 6.20mm
• Ø outside: 7.12mm
• Shaft weight (in grains per inch): 5.83
• Straightness (in inches): ± 0.006
• Material: Carbon
• Suitable protector ring / nock collar: 7.15 mm
• Length: 32 inches
• Tip: Screw-in tip with O-ring, 100 g
• Fletching: 3-inch vanes or natural feathers, colour: green/green/blue
• Nock: Insert nock

Spine 600

• Ø inside: 0.246 inch / 6.20mm
• Ø outside: 7.03mm
• Shaft weight (in grains per inch): 5.23
• Straightness (in inches): ± 0.006
• Material: Carbon
• Suitable protector ring / nock collar: 7.15mm
• Length: 32 inches
• Tip: Screw-in tip with O-ring, 100g
• Fletching: 3 inch vanes or natural feathers, colour: green/green/black
• Nock: Slip-in nock

Spine 700

• Ø inside: 0.246 inch / 6.20mm
• Ø outside: 6.86mm
• Shaft weight (in grains per inch): 4.72
• Straightness (in inches): ± 0.006
• Material: Carbon
• Suitable protector ring/nock collar: 7.00 mm
• Length: 32 inches
• Tip: Screw-in tip with O-ring, 100 g
• Fletching: 3-inch vanes or natural feathers, colour: white/white/orange
• Nock: Insert nock

Spine 800

• Ø inside: 0.246 inch / 6.20mm
• Ø outside: 6.79mm
• Shaft weight (in grains per inch): 4.33
• Straightness (in inches): ± 0.006
• Material: Carbon
• Suitable protector ring/nock collar: 7.00 mm
• Length: 32 inches
• Tip: screw-in tip with O-ring, 100 g
• Fletching: 3-inch vanes or natural feathers, colour: red/red/black
• Nock: insert nock

Contents:
12 pieces